MICRO USB 6PIN SERIAL CONVERTER STC CP2102 USB 2.0 TO UART TTL ADAPTER MODULE TO REPLACE FT232 WITH PINS

Sepcifications

1. Built-in USB transceiver, without external circuit device

2. Contains clock circuit, without external circuit device

3. Contains power-on reset circuit

On-chip voltage regulator inside 3.3V output

5 Complies with USB2.0 specification requirements

6. Suspended pins support USB sleep state

7. Asynchronous serial data bus compatible with all hand shakes and modulation controller interface signals

8. Data format is 8 bit data, 1 stop bit and parity drill bit

9. 512 byte connotation receive buffer and 512 byte transmit buffer

10. Supports hardware or X-ON / X-OFF Handshake